A PROFESSIONAL MANUFACTURER OF MOTORIZED BALL VALVE

Home / All / 5 common wiring motor ball valve /

OP04 Wiring - 2 Wires, auto return electric motorized ball valve

OP04 Wiring - 2 Wires, auto return electric motorized ball valve

OP04 Wiring - 2 Wires, auto return electric motorized ball valve
OP04 Wiring - 2 Wires, auto return electric motorized ball valveOP04 Wiring - 2 Wires, auto return electric motorized ball valveOP04 Wiring - 2 Wires, auto return electric motorized ball valve
Categories5 common wiring motor ball valve
BrandFlomarvel motorized valve wholesale manufacturer
ModelFH-MO-4
Actuator colorBlack ( customizable)
Valve materialPVC, Brass, SS304 for option
Valve size1/4''-1'' (DN8-DN25)
ThreadBSP, NPT for option
FOB portTianjin
Terms of PaymentWestern Union, T/T, Paypal
Download
Update TimeJun 14,2024
Detail Information
Motorized ball valve
electrically operated water valve
OP02, 2 wires auto return /fail safe
motor ball valve
1. Connects Red Wire To Positive Pole,  Black Wire To Negative Pole, The Ball Valve Opens (The Ball Valve Is Normally Closed By Default).
2. Disconnect Either Wire (The Circuit Is Open), There Is No Power Supply To The Ball Valve, The Ball Valve Closes.
※ Once In Position, There Is A Nominal Power Consumption To Keep The Capacitor Charged.
※ In Case Of Power Loss, Valve Will Return To Its Normal Position, Which By Default Is Normally Closed Valve. If Normally Open Ball Valve Is Needed, Please Let Us Know When Place An Order.
※ Voltage Of Power Supply For Option:5V DC/9-24V ADC/110-230V AC
※  A On/Off Switch Can Be Installed In Line With Red Wire For A Simple Set Up.

The Internal Capacitor Of The Ball Valve Actuator Is Charged During Initial Powering, Over A Period Of Approximately 60 Seconds. A Negligible Amount Of Power Is Required To Hold Position In Order To Keep The Internal Capacitor Charged. Without A Minimum Of 60 Seconds Powered The Capacitor May Not Maintain Enough Power To Return The Valve To The Closed Position.   Once The Power Is Cut Or Lost, The Internal Capacitor Will Use Its Power To Close The Valve Completely. 


Features
∎ Precision metal gear, high strength, reliable performance, long service life  
∎  Multiple wiring for remote control and valve status feedback to intelligent control unit
∎  Floating sealing ball valve, no leakage
∎  Low power consumption, battery workable
∎  Flame retarded PC-ABS enclosure with compact, exquisite structure for small equipment
∎  IP 67 protection, applicable for humid environment
∎  With visual position indicator
∎  Various connectors customizable
∎  Manual override available for option
Application
Motorized ball valve - widely used in water treatment systems, home automation, HVAC system, irrigation system, wildfire emergency sprinkler system, recreational vehicle (RV), trailer home, sprinkler truck, fire truck, air compressor etc., where automatic remote fluid control is needed.
Purchase guide for motorized ball valve
motor ball valve purchase guide
It Can Be Intimidating To Decide All The Specifications All At Once When Purchasing A Motor Ball Valve. Above Form Should Help To Simplify The Process By Listing The Steps Needed To Tackle All The Specifications.
Dimension
quarter turn actuator valve
D1/D2
DN
φd
L1
L2/L3
H1
H2
Weight (KG)
1/4''
DN8
8
45
10
21
68
42
0.25
1/2''
DN15
15
57
11
25
71
42
0.31
3/4''
DN20
20
63
12
31
74
42
0.40
1''
DN25
25
73
16
37
77
42
0.51
Unit: mm
Technical parameters
Series
Torque
Operating time
Working voltage
Working current
Max. power
Max. pressure
FH
2.5 N.M
<5S

3-6V DC, 9-24V ADC, 110-230V AC

<100 mA
5W
1.0 Mpa
Medium temperature
Ambient temperature
Humidity
Enclosure
Service life
Wiring
0-100℃/32-212℉
-20-45℃/-4 -113℉
95%
IP67
50,000 - 80,000 times
OP01, OP02, OP03, OP04,
OP05 optional, customization available
Certifications
small electric water valve
valve with electric actuator
motorized ball valve 12v
electric open close valve
Factory
Manufacturer sepcialized in electric motor ball valve.
electrically operated water valve
Review
  • Loading...
Contact Us Now
If you would like to know more about our products and services, complete the form below, and we will contact you as soon as possible to discuss your requirements.
*Email
Tel
*Title
*Content
How to place an order for our motor ball valve?
  • 1. Confirm the specifications of the electric motor ball valve needed.
  • 2. We offer an quote for the product and the shipping cost if needed.
  • 3. Make a Proforma invoice for payment, if the quote is accepted.
    4. Start production and update shipping information after shipment.
    5. After-sales service if needed.
Click To products
Contact Us Now
If you would like to know more about our products and services, complete the form below, and we will contact you as soon as possible to discuss your requirements.
*Email
Tel
*Title
*Content